Design and Application of Open Retaining Ring

location:Home / NEWS / Design and Application of Open Retaining Ring

Design and Application of Open Retaining Ring

date:[2023-03-30]     pk_hits:
挡圈其实大家都或多或少有所了解,但是开口挡圈大家可能就没有涉及过了,开头挡圈顾名思义就是形状为开口不闭合的挡圈,常常用于固定零部件,使用十分广泛。
一、开口挡圈定义
开口挡圈形状开口成E状,用于在轴上固定零(部)件用的挡圈,适用于公称直径D=1.2~15MM的开口单圈。

二、开口挡圈用应用实例
开口挡圈一般用于在轴上固定轴承、齿轮等零件用的挡圈。
在轴上固定轴承:注意卡圈的外径(D)与轴承肩径(Lo)之间的关系,需要满足D
在轴上固定齿轮:在齿轮上开槽,槽深度与圆柱销直径相等。卡圈与圆柱销一起配合使用,固定齿轮,注意卡圈的外径(D)与齿轮齿根圆(df)之间的关系,需要满足D
在轴上固定其他零件:卡圈与圆柱销一起配合使用,固定零件。

三、开口挡圈设计要求:
开口挡圈的设计过程中,关键的部分就是挡圈的公称直径、开口、厚度与轴上沟槽的宽度和直径的配合。不同直径的轴,配合不同型号的卡圈。设计要求,在国标GBT-896-1986-开口挡圈“E”rings 中有推荐的设计尺寸。由于开口挡圈已经是标准件了,只要按照标准设计,在市面上很容易买到标准的卡圈。
Rui'an Leichi Automotive Parts Co., Ltd

All product images and promotional images on this website belong to us and are not allowed to be used by any individual or organization. Misappropriation is subject to investigation.

Rui'an Leichi Automotive Parts Co., Ltd

Tel:0577-66003961Fax:0577-66003962Phone:13968888163 E-mail:8892@163.comAdd:zhejiang ruian pond town Lin industrial zone

WeChat

National Service Hotline

13968888163

We warmly welcome your consultation and will provide you with satisfactory solutions for automotive parts